How to choose stainless steel flange material?

How to choose stainless steel flange material?

High Quality Flange mainly used in food industry and surgical equipment, molybdenum is added to obtain a special structure of corrosion resistance. Compared with 304, it has better resistance to chloride corrosion, so it is also used as "Marine steel". SS316 is commonly used in nuclear fuel recovery facilities. Grade 18/10 stainless steels usually also meet this application level.

In order to save stainless steel material, use the form of welding ring. The sealing surface of this structure must be machined after welding ring and pipe. It is usually hung below the operating pressure of 2.5mpa. Smooth face welded flange, due to poor connection rigidity, poor sealing performance, so it is not suitable to use equipment with high air tightness requirements for toxic and inflammable and explosive media.

The connection plate of this structure is made of carbon steel or stainless steel. If it is made of carbon steel, the surface needs to be nickel-plated. The clamp material is cast aluminum ZL7.

Nine characteristics of stainless steel reducing tee

Nine characteristics of stainless steel reducing tee are analyzed by Stainless Steel Tee Exporter.

1. Stainless steel reducing three-way surface thin and strong very thin oxide film (self-passivation film), with corrosion resistance (oxidation acid, organic acid, cavitation), heat resistance and wear resistance.

2. It has high corrosion resistance no matter it is buried or used for pipeline connection. So, use at all sorts of water quality more, can disinfect effectively sterilization, although immerse in water for a long time, also won't have rust mark and spot. It is also resistant to corrosion and excessive exudate, able to keep the water clean and sanitary, effectively prevent water pollution, and able to withstand the impact of high water flow at 30 meters per second.

3. Stainless steel tee has corrosion resistance because of the alloying elements contained in the steel.

4. Stainless steel reducing tee corrosion test data shows that the stainless steel tube can be used for up to 100 years, and does not need daily maintenance.

5. Good performance, low price, low cost of operation and maintenance.

6. Stainless steel reducing tee has excellent mechanical and physical properties.

7. At the same time, good insulation performance, especially suitable for hot water transportation.

8. stainless steel reducing tee strength is very high, is 2 times of galvanized pipe, 3 times of copper pipe, pp-r pipe 6-10 times, can withstand the vibration impact, with no leakage, no burst, fire, earthquake characteristics, so it is very safe and reliable;

9. Stainless steel reducing tee has good antifreeze and heat resistance, simple installation and connection, light weight and good softness.

That's all for the sharing,and we supply Stainless steel tee for sale, if you have any demand for our products,just feel free to contact us.

[Tee for sale]Two types of tee valves

Two types of tee valves

Carbon steel Cap Exporter shares that three-way valves have three entrances and exits connected to three pipes for confluence, diversion and reversal of fluids. Y-shaped three-way valve is 120, 135 ° degrees, 90 ° three rectangular valve is divided into T and L port. Valve can be equipped with manual, worm gear, pneumatic, electric, hydraulic drive control.

Y-type stainless steel three-way valve:

Y-shaped three-way ball valve with each other to 120 °, 135 ° two body structure form, the y-shaped three-way ball valve flow smooth, fluid resistance small, flow ability. When switching, the medium has no retention and will not cause secondary pollution. Equipped with electric actuator, pneumatic actuator to achieve automatic control. Y-type three-way ball valve flow diagram, three combinations, please choose one flow combination.

Right-angle three-way valve:

Three-way ball valve has t-shaped and l-shaped flow channel, t-shaped can make three orthogonal pipe connection and cut off the third channel, play the role of diversion, confluence. L shape can only connect two pipelines directly intersecting with each other, and cannot maintain the interconnection of the third pipeline at the same time. It only plays the role of distribution.

Working mode L - type flow channel three - way four - side valve seat ball valve, the use of two - side valve seat, force balance, ensure reliable sealing closed channel. It is mainly used for reversing flow path.

T-shaped flow channel three-way four-side valve seat ball valve, using four-side valve seat, can have three or two directions at the same time in the conduction state, the ball 1/4 turn, cut off, conduction media. It is mainly used for diversion, mixed flow, commutation and complete opening of three channels.

That's all for the sharing,and we supply BARRED TEE for sale, if you have any demand for our products,just feel free to contact us.

[High Quality Splay Blind Plate for sale ]Induction of pipe connection methods

Induction of pipe connection methods

Pipe, pipe coupling, valve and equipment in and out of the connection between the pipe connection method, by the nature of the fluid, pressure and temperature as well as pipe material, size and installation site and other factors, the main thread connection, flange connection, socket connection and welding and other 4 methods, the following detailed analysis shared by the Stainless Steel Elbow Supplier China. 

1, welding connection: the strength and sealing of this connection is the best, suitable for all kinds of pipelines, saving labor and materials, but the disassembly must cut off the pipe and pipe connection.

2, socket connection: it is used for connection between cast iron pipe, concrete pipe, clay pipe and its connecting parts. It is only suitable for water supply, drainage and gas pipeline working at low pressure and normal temperature. In connection, the socket socket is usually filled with hemp wire, cotton thread or asbestos rope, and then filled with asbestos cement or lead and other materials. Rubber sealing ring can also be filled in the socket socket to make it more flexible and allow a small amount of movement of the pipe.

3, threaded connection: mainly suitable for small diameter pipe. When joining, should wrap on thread joining part commonly fluorine plastic sealing belt or besmeared on thick lacquer, wind on hemp silk wait for sealing material, in order to prevent leak. When the pressure is above 1.6 mpa, gasket seal is generally added on the end surface of the pipe. This connection method is simple, can be removed and reassembled, but must be installed in the proper place of the pipeline live joints for easy disassembly and assembly.

4, flange connection: High Quality Flange for sale China applicable diameter range is large. According to the fluid properties, pressure and temperature when the choice of different flange and sealing gasket, use bolt clamping gasket to maintain the seal. Flanged connections are usually used in sections of pipes that require frequent disassembly and in places where pipes and equipment are connected.