Features of Welding Neck Flange

Welding Neck Flange is a kind of pipe fittings, which refers to a flange with a neck and a pipe transition and is welded with a pipe.

Welding Neck Flange is not easy to deformation, sealing is good, widely used. There is a corresponding rigidity and flexibility requirements and reasonable welding thin transition, welding mouth from the joint surface distance, the joint surface from welding temperature deformation.

We can also supply the high quality 45°welded elbow, threaded plug etc. If you need, welcome to contact us.

The importance of carbon steel tee

Carbon steel tee temperature resistance, pressure resistance, flexibility and heat resistance, and its performance is higher than other plastic pipes.

The carbon steel tee has the advantages of smooth inner wall, small resistance of heat medium flow, acid and alkali resistance, long service life and convenient installation.

Carbon steel tee is suitable for petroleum, natural gas, chemical, water and electricity, building and boiler industries. The manufacturing cycle can be shortened and the production cost is greatly reduced.

We can also supply the stainless steel stub end, expansion joints etc. If you need, welcome to contact us.

Features of Carbon Steel Tee

Carbon steel tee is suitable for petroleum, natural gas, chemical, water and electricity, building and boiler industries.

1, long-term pressure resistance performance, only from the design stress, the national standard carbon steel three pass withstand voltage performance is best.

2, temperature resistance, pressure resistance, flexibility, heat resistance, and its performance is higher than other plastic pipes.

3, processability stability.

4, heat conductivity: for floor heating pipes need good thermal conductivity.

5, low temperature heat shock resistance.

We can also supply the pipe fitting, stainless steel stub end etc. If you need, welcome to contact us.

Maintenance methods of stainless steel seamless bend

In the use and maintenance of stainless steel seamless bend, need to pay attention to a lot of things, the need for users in accordance with certain methods for use.

1, long-term storage of stainless steel seamless bend, often keep the stainless steel seamless bend drying and ventilation, keep the device clean and tidy.

2, stainless steel seamless bend application handwheel, please do not use levers or other tools, so as not to damage the valve.

3, stainless steel seamless bend valve packing gland bolts should be equally tightened, should not be compressed into an oblique state, so as not to hurt, impede stem movement or cause leakage.

We can also supply the forge fitting, integral flange etc. If you need, welcome to contact us.

What are the advantages of carbon steel cap

Carbon steel cap used for sealing pipe, and the same pipe plug, but the cap can be directly screwed on the pipe, do not need other fittings.

Carbon steel cap is an important component of pressure vessel equipment in petrochemical industry, atomic energy industry, food and pharmacy industry. The quality of carbon steel cap is directly related to the long-term safe and reliable operation of the pressure vessel.

Carbon steel cap has the advantages of heat resistance, corrosion resistance, heat preservation and energy saving etc.

We can also supply the high quality socket elbow, seamless steel reducer etc. If you need, welcome to contact us.

The main function of splay blind plate

Splay blind plate is a pipeline, mainly for the convenience of maintenance, half siderosphere half blind.

Splay blind plate is usually used for cutting off the medium, especially in the piping of poisonous, flammable and inert medium. Splay blind plate with valve, you can easily switch, but also a clear look at the running state.

The blind plate is mainly used for separating the production medium completely, preventing the cut-off valve from being closed and affecting the production and even causing accidents.

We can also supply the high quality forge fitting, stainless steel stub end etc. If you need, welcome to contact us.

Application of Pipe Fittings

Pipe Fittings are applied to connect two pipe ends together, to change direction or size of the pipes. There are many different types and shapes on the market. Pipes are made of either plastic or metal and so as pipe fittings.

Most of the pipe fittings are rounded shape, but not always. The shape varies within different types, to match pipes.They are used in different applications like plumbing, waste, vent systems and many other industries.

Pipes are mostly used for transportation of fluids and solids and depending on areas of their usage, the materials they are made of vary. The same apply to pipe fittings. Within applications there are different requirements of sanitary, strength and so on.

WH-STEEL manufacture high-quality pipe fittings including flange, forge fitting, 45°, 90°, 180° bend and elbow, stainless steel seamles and alloy steel bend, reducer, threaded Tee with different sizes, material and kinds.If you need,contact us!

How to properly install flanges

The flange is a connecting part between the shaft and the shaft, used for the connection between the ends of the pipe.

In order to prevent corrosion and leakage after flange installation, we should pay attention to a few points:

1, before flange installation, to check the flange surface, whether it is smooth and whether there is rust. The presence of rust is an important cause of flange corrosion.

2, the installation should pay attention to check whether the gasket anti-aging, oil resistance, mechanical properties and flexibility, before installation, pay attention to the surface shape, the shape of the connection is placed correctly.

3, the flange fastening force should be uniform, the cushion compression should be controlled at 1 / 3 or so.

We can also supply the high quality pipe fitting, carbon steel cap etc. If you need, welcome to contact us.

The benefits of pickling stainless steel stub end

Stainless steel stub end is a product used to seal stainless steel pipes. It is a product after the end of the pipe, or two heads at one end of a tube to be used as containers.

When stainless steel stub ends are being manufactured, a protective coating on the surface of stainless steel is destroyed. In production, people usually pickling it, because it is only after such treatment will make it longer life, and in use has good mechanical properties.

After pickling, the stainless steel stub end must be passivated, and its main purpose is to make the protective film more resistant to corrosion.

We can also supply the pipe fitting, splay blind plate etc. If you need, welcome to contact us.

Anti-bending properties of stainless steel elbow

The mouth is provided with a stainless steel elbow lining, lining in pipe opening part is fixedly connected with the inner wall, wide mouth, the other part is located in the external pipe lining, the product is located in the mouth outside the lining provided with cesarean section incision.

Stainless steel elbow, relates to the field of building and decoration, which is characterized in that the bending section including elbow body, elbow body products including bending and bending section are respectively connected to the ends of the linear segments, including arc bending, bending ends segment product are connected by a bending part, and the two formed hollow.

The bending performance of the elbow body is enhanced, and the service life of the elbow body is also increased by the setting of the bending part.

We can also supply the forge fitting, integral flange etc. If you need, welcome to contact us.

Heat treatment method for stainless steel cap

Stainless steel cap is welded on the pipe end or installed in the pipe outer thread on the cover wall pipe fittings, used for sealing pipe.

Method for heat treatment of stainless steel head:

1, softening annealing: the main purpose is to decompose carbide, the hardness decrease, and improve the processing performance, the spherical stone cast iron, for the purpose of obtaining a very high fertility iron organization.

2, normalization treatment: mechanical properties of castings that are mainly improved or made entirely of iron and are evenly distributed. ,

3, quenching: mainly to obtain higher hardness or abrasion strength, simultaneously to very high surface wear resistance characteristics.

We can also supply the splay blind plate, socket elbow etc. If you need, welcome to contact us.

Application field of threaded plug

Threaded plug is everywhere in our lives, so let's get to know which areas of threaded plugs are used?

The threaded plug works by inserting the steel tube into the sleeve, locking it with the sleeve nut, resisting the sleeve and cutting into the pipe to seal.

When the threaded plug is connected with the steel pipe, the welding is not needed, and the utility model is favorable for fire prevention, explosion prevention and high-altitude operation, and can eliminate the defects caused by careless welding. Therefore, it is a kind of advanced connecting device in pipeline, automatic control device, pipeline, oil refining, chemical, petroleum, natural gas, food, pharmacy, instrument and meter, etc.. Apply to oil, gas, water and other pipe connections.

We can also supply the carbon steel cap, integral flange etc. If you need, welcome to contact us.